JavaScript is disabled. For a much better experience, please permit JavaScript in her browser before proceeding.

You are watching: Acura mdx rear wiper arm replace


My rear wiper eight is sagging. To correct it, ns was trying come remove and also reinstall that so the it would certainly look level, left come right.I removed the plastic cover and also the seed behind the cover, however felt like I was going to break something v the amount of pressure I to be pulling. Is there a secret to remove the rear wiper arm?
*

Anybody obtain any an ext info on this yet? My rear wiper is not functioning anymore. I deserve to hear the motor spin yet it doesn"t desire to revolve the arm. It does move around like it"s stripped so that looks favor I"m walk to need to replace the whole assembly. Is there a method to eliminate the plastic covering on the ago of a 05 there is no breaking it? I recognize once I gain under that i can change the remainder out.
The plastic cover slides ideal off. It"s kinda clipped in, so every you have to do is background on the edges.
I quiet haven"t gotten around to messing with re-aligning the position. Have actually you tried? do you understand if every it take away is un-bolting the arm and also re-positioning it on the bolt?
Excellent diagram! many thanks I"ve obtained it solved now. The nut to be loose, I included a lock washer. Hopefully that will certainly work.
*

*

Finally solved my contempt sagging wiper. No much more manually adjusting it, just for it to slide ago down.Thanks for the chart Marcos12.I only had seen the diagram on how to eliminate the cover in ~ the base. I would only add after removing the cap and also 10 mm nut, usage a little liquid wrench top top the subject (my eight wasn"t going anywhere), use pliers and also a rag to protect the wiper eight base, and also pull increase firmly.
"01 MDX Touring: lumber Steering Wheel/Meter Panel/Shift Knob, animal leather Armrest, all Season Mats, LED Cabin Lighting, Separation Net, Cargo Tray/Cover/ Net/Organizer, rear Mud Guards, waiting Deflector, Moonroof/Door Visors, Tailgate Spoiler, shining Chrome Sidesteps, cleared Headlamps, 5k HIDs, 20% color Front, Cross-Drilled Brembo Rotors, 18" PVD chrome A-Spec wheels, Hankook RH07 Ventus together tires.Future Mods: matched Front reduced Trim & Fender Flares, next Markers, new NBP, CW, or AGM paint.
That seed that"s supposed to it is in torqued come 8.8ft/lbs feels favor it to be torqued to end 75lbs. Did you have a hard time gaining yours off? i haven"t tried again since it felt like something to be going come break. For this reason after you lifted the wiper eight off, you just reinstalled it in the exactly position? hopefully it will stay.
*

That nut that"s supposed to it is in torqued to 8.8ft/lbs feels choose it to be torqued to over 75lbs. Did you have actually a difficult time obtaining yours off? ns haven"t do the efforts again since it felt favor something to be going come break. For this reason after friend lifted the wiper arm off, you merely reinstalled that in the exactly position? hope it will certainly stay.

Just fight it through a tiny lithium grease or WD-40, have to loosen ideal up, very same for the arm there.You climate line increase the eight to the correct sit height, tighten bolt, placed cap ago on.
"01 MDX Touring: timber Steering Wheel/Meter Panel/Shift Knob, leather Armrest, all Season Mats, LED Cabin Lighting, Separation Net, Cargo Tray/Cover/ Net/Organizer, rear Mud Guards, wait Deflector, Moonroof/Door Visors, Tailgate Spoiler, bright Chrome Sidesteps, cleared Headlamps, 5k HIDs, 20% tint Front, Cross-Drilled Brembo Rotors, 18" PVD chrome A-Spec wheels, Hankook RH07 Ventus together tires.Future Mods: suitable Front lower Trim & Fender Flares, next Markers, fresh NBP, CW, or AGM paint.
Yep, at sight easy.Just hit it v a little lithium grease or WD-40, have to loosen ideal up, exact same for the arm there.You then line increase the eight to the correct sit height, tighten bolt, placed cap ago on.

Lithium grease and WD-40 space not an excellent for loosening up items.For that project you require PB Blaster or similar that is designed come penetrate. G
*

ugh, the very first snowfall in Oct 29th and the following morning I discovered the behind wiper blade/arm right down, & it"s prefer a wagging tail! hopefully it"s not stripped... Due to the fact that I deserve to spin it around 360 and hear naught engaging thanks to others who posted and the diagram yes, really helped; i"ll go the end there and tackle this with confidence currently
Very old article here however thought I"d try a question...Trying to correct sagging on my 2005 behind wiper arm. Got the seed off yet the eight won"t move, even after using PB Blaster. Walk the 2005 arm screw off clockwise, respond to clockwise, or pull off? Don"t want to rest it.Thanks
It should just pull off, periodically lifting the blade up deserve to release some uneven bending on the pivot point. If that doesn’t occupational a puller can be used.

See more: Maplestory How To Make A Guild In Maplestory, How Do I Create A Guild


Update: 2005 arm does simply pull off. Need to work that a little bit from a few different angles. The seed is threaded on the very first part of the bolt and also the arm sits on the textured lower half of the bolt - watch pic.
Acura starrkingschool.net Forum - a ar where enthusiasts talk about engines, tires, service and everything you have to know about the MDX!
Second Generation MDX (2007-2013)General DiscussionsThird Generation MDX (2014-2020)First Generation MDX (2001-2006)Problems
starrkingschool.net is an elevation Acura enthusiast website owned and operated by VerticalScope Inc. Contents on starrkingschool.net is created by that users. Starrkingschool.net is no in any method affiliated with Honda motor Company