If you have a circulation restrictor in your showerhead, then you room using much less water for her bathtimes. Follow to experts, these tools reduce the water circulation from her showerhead come 2.5 gallons every minute.

You are watching: How to remove flow restrictor from kohler shower head

Although this is a good idea, the restrictor can become a shower time nightmare, particularly in locations with short water pressure. Here, these items turn an ideal shower spray to an annoying trickle that water, do it complicated to rinse her body.

You have the right to take out the flow restrictor to settle this problem, but you could have to pay more for your utility bills. Are you ready to invest the extra cash? below are easy actions to remove circulation restrictor from shower head fittings.

Before you gain started, for sure you have actually the forced tools in place. This include:

Adjustable/pipe wrenchragsome file clipsneedle nose pliersTeflon tape

Let’s use these devices in the following guide.

How to remove a circulation Restrictor from an installed Shower Head

Many dwellings have this form of shower head head. V these steps, you have the right to handle extract the restrictor v ease.

Step 1: eliminate the Head


Locate the bent pipe or shower head arm and also connector nut that sticks out of her bathroom wall. Wrap both parts with a clean rag to safeguard them indigenous scratches.

Hold the arm firmly v a pipeline wrench and also loosen the connector nut with an flexible wrench. Loosen until the head is eliminated from the shower head arm.

Step 2: Extract the Restrictor


Look for the washer inside the connector nut. Here this item offers a tight seal and also secures a mesh filter or screen. Normally, both items have to be extracted before you can see the restrictor.

Gently take the end the washer with needle-nose pliers. Remove the display by tapping the bottom the the head v your palms. If the display screen is stuck, use the pliers to remove the item.

Pull out the circulation restrictor v a flat-head screwdriver. If you don’t understand what a restrictor look at like, that a plastic disc with any kind of of the adhering to colors such as white, green, pink, and also red.

Step 3: collection Up the Showerhead


Return the display screen to its initial position. Solve the washer and push it with your fingers to protect against it from falling off. Take the end the currently Teflon tape indigenous the linear grooves top top the shower head arm. Wrap fresh tape approximately the subject in a clockwise direction.

Secure the connector seed by tightening it through your hands. When the nut is steady placed, plunder a rag about the nut and also arm, then grab the arm v the pipeline wrench. Usage the adjustable wrench to turn the nut.

How to remove a circulation Restrictor indigenous a Handheld shower head Head

Handheld shower head heads room quite well-known with homeowners. The tips listed below will help you take out their water restrictor in ~ minutes.

Step 1: inspect for the circulation Restrictor


Look because that the water restrictor ~ above the handheld showerhead by utilizing the owner’s hands-on or manufacturer’s website.

Usually, the water restrictor is discovered inside the holder attached to the shower arm, or the finish of the take care of that connects to the versatile tubing. However, the position of the restrictor counts on the brand.

Step 2: Extract the Restrictor


If you have actually a product with its showerhead at the bottom that the handle, safeguard the connector nut through a clean rag. Firmly host the spanned nut with flexible pliers and rotate counterclockwise to take the end the handle from the tubing.

Pry the washer the end of the handle and also filter screen with needle-nose pliers. Pull out the exposed restrictor with a level head screwdriver.

If you have a product v a restrictor within the holder, defend the connector and shower arm v a clean rag. Firmly host the arm with a pipeline wrench while you use the adjustable pliers to host the nut. Turn the nut through clockwise motions until the holders drop native the shower arm.

Move come the end of the holder, then pull out the washer, and filter screen with needle-nose pliers. Remove the restrictor through a level head screwdriver.

Step 3: set Up the shower Head


Return the filter screen and washer to their original position top top the fixture. Certain you press in the washer v your fingers. Take it out any type of previous ice cream which type the linear grooves on the flexible tubing or shower arm.

Cover the threads in fresh tape. Tighten the connector v your hands and also wrap the nut with a rag. For sure the nut another quarter rotate with an flexible wrench.

How to eliminate a flow Restrictor indigenous a Moen shower Head

Do you usage a Moen showerhead? here are is an easy means to take out the restrictor in this fixture and also enjoy a strong shower spray.

Step 1: Take out the shower head Head

Wrap the showerhead v a clean rag and tighten the jaws through an flexible wrench. Host the shower pipeline (the component closest to the bathroom wall) v one hand and also rotate the showerhead connector through an adjustable wrench.

Step 2: Disassemble the Fitting

Extract the rubber O ring gasket through your hand to protect against potential damages to the fragile item. Lay your palm top top the showerhead and also shake gently to remove the screen

Step 3: find the flow Restrictor

Move to the neck the the showerhead and find the circulation restrictor. This item is make from plastic and also can be uncovered with a screwdriver.

Step 4: Take the end the circulation Restrictor

Gently extract the water restrictor from the neck of the fixture. For sure you use minimal pressure when taking care of the inner thread of the showerhead to prevent damage.

Step 5: Reassemble the Parts

Return the display screen to the showerhead and also fix the O ring on it. Remember to store this assembly tight and also secure.

Tightly pave the brand-new plumber tape about the showerhead. Then, firmly settle the Moen shower Head come the shower arm v your hands. Finally, wrap the rag approximately the shower head arm and also tighten through the connections with the adjustable wrench.

Before using our steps to remove circulation restrictor from shower head head, drain or near the toilet fixtures that supply water.

How to remove the circulation Restrictor in a Waterpik Showerhead

Like most showerheads ~ above this guide, this fixture provides a circulation restrictor to protect against wastage. Together a result, you will certainly pay fewer receipt to your energy provider.

However, the restrictor deserve to disturb the shower head spray, transforming it come an annoying weak trickle. To enjoy a solid flow, particularly when you rotate the shower valve, you should remove the water restrictor with the adhering to steps.

Step 1: remove the shower head Head


Extract the Waterpik shower head native the pipe the extends native the wall (showerhead). To perform this, usage a crescent wrench yet ensure the showerhead is wrapped through a rag to protect against scratches.

Step 2: Extract the Washer


Find and also remove the black color rubber washer top top the shower. You can uncover it in between the showerhead and shower arm.

Step 3: Extract the circulation Restrictor


Take out the restrictor native the showerhead. Location a Phillips screwdriver into the star-shaped hole in the spray nozzle. Turn the tiny white, green, or pink restrictor behind the hole till it’s loose.

Step 4: protect the shower Arm


Cover the threads on the arm with plumbers tape. Utilizing this adhesive, you will defend the threads from rust as soon as you affix the shower head head to it.

Step 5: Reassemble and Reinstall the bathroom Fitting

Return the screens and rubber gasket to your positions ~ above the shower arm. Attach and tighten the showerhead ~ above the shower arm through a crescent wrench. Remember to cover the showerhead v a rag.

How to remove a flow Restrictor from a Delta Showerhead

Another kind of showerhead that offers a circulation restrictor is the Delta model. As expected, this attribute conserves water (at 2.6 gallons per minute) and cuts your energy bills.

Although federal legislation ensures that service providers sell showerheads that have these items, restrictors will mitigate the water push in your shower.

If you want a shower through a strong spray, you will should remove the regulator native the restroom fitting. Here is a quick guide come take out the accessory through the tools mentioned above.

Step 1: safeguard the Connector

Wrap a clean rag roughly the chrome connector in ~ the spot where the showerhead extends native the wall. The fabric keeps the fixture native damage.

Step 2: Unscrew the Showerhead

Tighten an adjustable wrench over the wrapped cloth. Ease the showerhead through the wrench and take out the fixture from the pipe

Step 3: Extract the Washer

Carefully eliminate the washer from the fixture’s threaded coupler. For sure you usage a pair the needle-nose pliers.

Step 4: eliminate the circulation Restrictor

Firmly organize the opaque nylon circulation restrictor under the washer v the needle-nose pliers and also pull it the end of the fixture.

Step 5: Reassemble and Reinstall the Delta Showerhead

Return the washer to its previous place on the Delta coupler. Push the item v your thumb to store it secure. Replace the Delta connector on the pipe and also tighten that down with the adjustable wrench come secure the connection.

How to boost the Spray that a Peerless Showerhead


If you have a Peerless showerhead that offers a trickle that water, clean the connection, and taking the end the water restrictor space easy means to improve the flow. Here are several steps to take care of this showerhead for short water pressure.

Step 1: Disassemble the Parts

Move to the pipe end of the showerhead. Closely remove the rubber gasket and filter screen with a screwdriver. Clean any dirt or mineral accumulation on the screen.

Step 2: Loosen and also Remove the flow Restrictor

Insert the screwdriver right into the pipe finish of the showerhead. Press the device on one edge of the plastic water restrictor. Location the tool under the flow restrictor and pull gently to eliminate it native the opening.

Step 3: Reassemble and Reinstall the ShowerHead

Replace every the removed parts mentioned above to their original positions. Finally, reassemble the showerhead.

If your showerhead does not have a water restrictor, over there is no need to worry as part models carry out not come through one. If this is the case, you can enjoy much better water press by using a showerhead for this purpose.

Wrap Up

Most shower top have flow restrictors to control the lot of water the flows from them. They even play a significant role in to reduce the energy bills of her home. However, they can lead to situations of short water push in part bathrooms.

If you autumn into this category, use this guide to extract your showerhead; disassemble it; take the end the flow restrictor, and reinstall the restroom fixture.

See more: What Is The Immediate Fate Of Excess Dietary Protein In The Body ?

I expect you find this guide helpful for various types of showerheads. If girlfriend have any kind of questions, feel totally free to ask lock in the box below.